Hudson hand sprayer nozzle question

I have a 2 gallon hand held pump sprayer. It has the brass round tip that sprays in a cone shape. I'm searching for a spray end that has a flat spray tip like used on field sprayers for a more direct spray and a flat spray patttern. Does anyone know if anything like this exists or could one be made from a sprayer drip nozzle? Any assistance is always appreciated.
 
It's been a long time but I used to spend my days at work solving this kind of stuff.
My memory of part numbers may be a little off but close,maybe.
See if you can unscrew the noz. assy and have the wand with a threaded end left. Take
a Spraying System nozzle body,it s either a 1321-1/4tt or a 1322-14tt. Anyway,the one
with female threads on one end and standard nozzle male threads on the other. Then you
can get a Spraying Sys nozzl cap #1325br or 8027ny and an 80degree flat fan tip.
Hope this is close enough to get on the right path.
 
2 Gal sprayer "Roundup" brand. Has the round adjustable tip, and the sprayer type with two different nozzles. All for $10. I don't know about others but I keep 4 handheld sprayers for the four different pesticides I use around the place on the garden, lawn and trees. Went to that after killing a few plants due to contamination.
 
I slipped and fell on a steep hillside and broke the wand on my pump-up sprayer. I replaced it with a new wand like used on 12 volt tank sprayers, and it worked so good I also changed the wand on my garden sprayer. New soft flex hose is nice too. Adjustable tip on the new wands.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top