MF 240 power steering control valve

Oliver70

New User
I installed a new Power Steering Control Valve on a MF 240. I have good power assist to the left but poor assist to the right. The old valve was leaking being the reason for it being replaced. Is there any adjustment I need to make?? I adjusted the rod from the steering wheel to the valve according to the manual for installation of the valve. Any help will be greatly appreciated.

Jay Graham
St.Clairsville,OH USA
 

Most likely something is preventing the shuttle plug from moving freely back and forth in he housing. I am not familiar with MF but on old Ford row crops, using a full length grease fitting would do it.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top