Stihl 034 no start

Whije back I posted about a Stihl 034 I was working on that had a scored piston and cylinder and melted spark plug.Fast forward,put a new cylinder and piston that is supposed to fit a 034 and 036.Runs good except the new cylinder must be taller because the top cover wont go back on,the two studs on top are about1/4 inch too far back to mate with the hold down nut. What a saw from hell.Will the top cover from a 036 or 038 fit ?? Looking for ideas!! Thanks for your help,,
 

Hard to say. Best bet is to get to a saw shop with a big pile of used parts and do the old "try it and see" thing. Could be a model variation too, like an 034 AV vs 034 Woodboss or whatever the variation might be. I know the 028 used at least 3 different oil pump set ups.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top