GE motor on a furnace fan, 26 years old. Bushings lost lube and it was almost to the point of not turning. Being the weekend I disassembled it and shined the bushings and shaft up lubed it and got it going until I get a replacement.
Question is on the best lube for the bushings. Bushings have a hole and a wick at the hole to shaft with a cavity around the wick. Green locking powder was in the cavity. Would that be dried out lube, something to have lube soaked in or other? Thanks
Untitled URL Link
Question is on the best lube for the bushings. Bushings have a hole and a wick at the hole to shaft with a cavity around the wick. Green locking powder was in the cavity. Would that be dried out lube, something to have lube soaked in or other? Thanks
Untitled URL Link