Geo-TH,In
Well-known Member
Had a battle removing the pin on left stabilizer.
Had to rebuild the hyd cylinder. No way I was
putting it back together without cleaning up the
holes. Now pin goes in with little effort. Couldn't
have done it without the reamer. The second hold
didn't align with the first.
BTW, MADE IN USA.
Sorry for the poor pic quality.
Had to rebuild the hyd cylinder. No way I was
putting it back together without cleaning up the
holes. Now pin goes in with little effort. Couldn't
have done it without the reamer. The second hold
didn't align with the first.
BTW, MADE IN USA.
Sorry for the poor pic quality.