Steve@Advance
Well-known Member
Had a request from the guys in the shop to try to
quiet down the compressor. It's a 10HP Ingersol
recip, typical clanging, hammering, compressor.
It sits in the corner of the shop, concrete tilt
wall building. It's pretty crowded back there, a
spare compressor and another machine close to it.
Thought about building an enclosure around it,
but it would be in the way, especially come time
to get it out or to work on it, plus the heat
entrapment.
Found some of these:
http://www.ebay.com/itm/NOISE-CONTROL-Acoustic-
Blanket-Wall-Ceiling-Panel-see-all-sizes-
quantities-/121442022831?
pt=LH_DefaultDomain_0&hash=item1c468235af
Has anyone ever tried them? I could build a
standing frame or hang them from the ceiling.
Other suggestions?
Thanks, Steve.
quiet down the compressor. It's a 10HP Ingersol
recip, typical clanging, hammering, compressor.
It sits in the corner of the shop, concrete tilt
wall building. It's pretty crowded back there, a
spare compressor and another machine close to it.
Thought about building an enclosure around it,
but it would be in the way, especially come time
to get it out or to work on it, plus the heat
entrapment.
Found some of these:
http://www.ebay.com/itm/NOISE-CONTROL-Acoustic-
Blanket-Wall-Ceiling-Panel-see-all-sizes-
quantities-/121442022831?
pt=LH_DefaultDomain_0&hash=item1c468235af
Has anyone ever tried them? I could build a
standing frame or hang them from the ceiling.
Other suggestions?
Thanks, Steve.