(800) 853-2651
SHOP NOW

Adaptor for respirator cartridge

S

Stan in Oly, WA

Well-known Member
Years ago I got what seemed like a very good price on a box of ten unopened full face respirators---less than $10 apiece. They are made by Sundstrom of Sweden, and seem to be of extremely high quality. The problem is that they use a single cartridge system which is threaded to NATO specs, or some European standard---I'm not sure. Replacement filter cartridges are prohibitively expensive compared to equivalent products for American made respirators---3M, for instance. Where would I even start looking for threaded adaptors that would get me from the existing thread size to a size that would accommodate the threads of a standard American filter?

Thanks, Stan
 
I used to get my filters from GRAINGER's.

Been quite awhile, but they carried the Swedish stuff.

HTH John,PA
 
Actually I had to make a resperator cartride for an MSA full face. Cartridges were no longer available. I took the threaded part from old cargtirdge and attached it to a newer one. Bubba helped.
 
Now that's more like the George Marsh I've come to appreciate. Very practical advice. Thanks.

It may seem like I don't have a sense of humor, but you've got to admit, bubba and duct tape are both well past their pull dates for laughs. We're just rustic here, not slow.

Stan
 
You must log in or register to reply here.

Similar threads

S
Adaptor for respirator cartridge
Replies
9
Views
2K
john *.?-!.* cub owner
J
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top