I had some set screws that needed. Torqued to 400 ft lbs. we
have a big torque wrench that goes that high but it is kinda a
pain to use. One of the other guys at the shop suggested
using a 4/1 torque multiplyer and torque to 100 ft lbs. this
dosent need to be super accurate mostly I was just wondering
if this would work. I think it will be close but far from accurate.
have a big torque wrench that goes that high but it is kinda a
pain to use. One of the other guys at the shop suggested
using a 4/1 torque multiplyer and torque to 100 ft lbs. this
dosent need to be super accurate mostly I was just wondering
if this would work. I think it will be close but far from accurate.