010 av Sthill saw

guido

Well-known Member
Hello,

I took a picture of the saw. The hole that the screw driver is in is the reason of my first post.
Any one know what I need? I got it to run a couple of times, and acted O.K. This morning no go. Sparks and with fuel added it puffed ones,

Thanks in advance........

Guiso.
a171206.jpg
 
Hole is for the tank vent. Line thru hole with grub screw inside the line. Line goes out hole in rf of the air box (under fuel fitting of the carb) if no hole there it is an early model. Drill one. Sheet meta screw in end of the line to keep dirt out.
 
Hello DankK,

Thanks! I'll take the carb off and take a look.
Right now it won't start, plenty of spark and fuel.

Guido.
 
Hello Greg1959,

I need to take the carb off, someone has the throttle cable on wrong. I'm only getting 1/2 throttle, and won't go back to idle. Got my work cut out!

Guido.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top