guido
Well-known Member
Hello,
The well is about 10years old. It is a submerged pump on a pit less adapter. This morning I added 10 lbs. of pressure to the bladder. It had 28# so I got it up to 38#. Could not keep the pressure up with sprinklers on. Went down below 40# It took a couple of minute to hit full pressure. But one flush and on again it went. I'm looking for something that I can do to get the volume up.
I'm thinking may be time to flush it. There are very fine grains of sand in one of the toilets. Smallest grain of sand I have ever seen, almost powder like. Any help would be appreciated,
Guido.
The well is about 10years old. It is a submerged pump on a pit less adapter. This morning I added 10 lbs. of pressure to the bladder. It had 28# so I got it up to 38#. Could not keep the pressure up with sprinklers on. Went down below 40# It took a couple of minute to hit full pressure. But one flush and on again it went. I'm looking for something that I can do to get the volume up.
I'm thinking may be time to flush it. There are very fine grains of sand in one of the toilets. Smallest grain of sand I have ever seen, almost powder like. Any help would be appreciated,
Guido.