Brad Buchanan
Member
Hey guys.
I built a rotary converter to power my newest tool, a 36" bandsaw at 550 volts 3 phase.
I am interested in fine tuning this sinusoidal voltage and correcting waveshape as is possible.
Is there an instrument which would allow viewing of the waveshapes that is reasonably inexpensive?
I see quite a few oscilloscopes for sale at auctions but don't know what to look for.
Also if the waveshape can be displayed will the harmonics also appear?
Brad
I built a rotary converter to power my newest tool, a 36" bandsaw at 550 volts 3 phase.
I am interested in fine tuning this sinusoidal voltage and correcting waveshape as is possible.
Is there an instrument which would allow viewing of the waveshapes that is reasonably inexpensive?
I see quite a few oscilloscopes for sale at auctions but don't know what to look for.
Also if the waveshape can be displayed will the harmonics also appear?
Brad