Tony Vidlak
Member
Does anybody know what type of chain this saw requires ? Does anybody know if it is 404/63 gauge or is it 3/8 50 gauge.
Thanks Tony
Thanks Tony
- Thread starter Tony Vidlak
- Start date
Bob Bancroft
Well-known Member
- Location
- Aurora NY
I never saw an XL12 with .404 chain. Any I saw had 3/8 pitch, .050" chain.
Tony Vidlak
Member
Thanks for the replies
With a little further digging I found out it is 3/8 50 ga
Thanks again
Tony
With a little further digging I found out it is 3/8 50 ga
Thanks again
Tony
Tony Vidlak
Member
Here is a picture of the saw.
It did not have a bar and chain when I got it.
The saw was covered with many years of oil and dirt and did not run. It runs and operates excellent now.
Thanks Tony
It did not have a bar and chain when I got it.
The saw was covered with many years of oil and dirt and did not run. It runs and operates excellent now.
Thanks Tony
Anonymous-0
Well-known Member
The old blue XL 12's like that one were good saws.
BUTCH IN NY
Member
In 1972 I wanted a chainsaw, went out and
bought a Homelite SXL-AO. Over the years I
bought about 4 spare chains. Still have the saw
sometimes it gets gummed up, get it cleaned up
and running great all over again. Still able to
use the original chain that came with the saw. Got a Homelite XL with 10 inch bar, Lost that
when repair shop closed down. Got another on E-Bay. Good to go again.
bought a Homelite SXL-AO. Over the years I
bought about 4 spare chains. Still have the saw
sometimes it gets gummed up, get it cleaned up
and running great all over again. Still able to
use the original chain that came with the saw. Got a Homelite XL with 10 inch bar, Lost that
when repair shop closed down. Got another on E-Bay. Good to go again.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy