Author	[Modern View]
old 02-08-2013 14:16:51 209.86.226.11 Report to Moderator	I did a wax cast on that Argentine rifle I had and that worked pretty well but on a black powder hand gun not sure how I could do that and get it back out of the bore [Reply]   [No Email]
Traditional Farmer 02-09-2013 18:09:17 67.233.72.177 Report to Moderator	Re: How do you determand the cal of a gun in reply to old, 02-08-2013 14:16:51   Was it a Argentine 7.65 X 53 Mauser? [Reply]  [No Email]
old 02-09-2013 20:40:42 209.86.226.27 Report to Moderator	Re: How do you determand the cal of a gun in reply to Traditional Farmer, 02-09-2013 18:09:17   Yes and long since sold [Reply]  [No Email]
Diydave 02-08-2013 16:26:54 96.244.162.208 Report to Moderator	Re: How do you determand the cal of a gun in reply to old, 02-08-2013 14:16:51   There is a silicone (I think) material, that shrinks just a little, on drying, that law enforcement uses to cast the ID of guns that have been intentionally damaged, at the ends of the barrels. I saw it on one of the How catch-em cop shows, on TV. If you have a Cop Buddy, ask about it, or google it. [Reply]  [No Email]
old 02-08-2013 18:22:49 209.86.226.56 Report to Moderator	Re: How do you determand the cal of a gun in reply to Diydave, 02-08-2013 16:26:54   Cop and buddy in this area does not mix since about 75% of them are on the take like most in the court house. Some people call the court system in this area the Little mafia [Reply]  [No Email]