Anonymous-0
Well-known Member
Went to a friends house he wanted me to help put in a new light over his sink. The old one was wired with 2-way switches. Red white and black wires at the switch, with just black and white at the fixture. We noticed that even with the switches in "off" position We are reading 10 volts at the fixture. No matter which way we position the switches or unhook wires we still read some amount of low voltage. We were going to cap off one of the switches and just make the circuit -- ON/OFF with one of the switches but we kept noticing 10 volts showing up even in off position. This is red white black with no green ground any where.Thanks.