60 acre hillside
Member
Years ago when quite young there was an old man who worked on tractors in an old shop with really old tools and a dirt floor.His most popular tractirs were the old McCormick standard treads. He had a huge drill press that had two switches. He told me to be careful with it and use both switches to start it and then just run the larger switch. This worked fine.
I have a 10 inch tool grinder with a broken centrifigual start switch. I had it worked on one tome and the repair shop could not get the right switch and repaired the switch with epoxy.the repair did not last long
I was wondering if I could wire up this grinder like that and possibly use an automotive Ignition / starter switch.
I have a 10 inch tool grinder with a broken centrifigual start switch. I had it worked on one tome and the repair shop could not get the right switch and repaired the switch with epoxy.the repair did not last long
I was wondering if I could wire up this grinder like that and possibly use an automotive Ignition / starter switch.