Author	[Modern View]
Stick welding 01-12-2013 17:36:08 96.53.210.246 Report to Moderator	Hope you cleaned up all the spatter even if it is on the inside. The front bumper looks a little out of place, like it was pieced together because there wasn't enough material to make it the same. The rear bumper follows the contour of the truck better and doesn't stick out as far. I don't really understand the tie down loops? I think tow hooks underneath would look cleaner and easier to hook to. How do you hook a proper tow strap to a closed loop? With a tow hook you can hook a tow strap, chain or whatever you want on it. [Reply]   [No Email]
scotc 01-12-2013 20:53:13 75.239.231.242 Report to Moderator	Re: Wrapped up the Silverado Bumper Build (Pics + Videos) in reply to Stick welding, 01-12-2013 17:36:08   The back bumper doesn't have the curve of the grill behind it either.... I think the grill guard would distract us from that. [Reply]  [No Email]
Puddles 01-12-2013 17:57:19 24.113.77.208 Report to Moderator	Re: Wrapped up the Silverado Bumper Build (Pics + Videos) in reply to Stick welding, 01-12-2013 17:36:08   If I wanted to attach a tow strap to a D-ring, I'd use one of these. [Reply]  [No Email]
Stick welding 01-12-2013 18:14:22 96.53.210.246 Report to Moderator	Re: Wrapped up the Silverado Bumper Build (Pics + Videos) in reply to Puddles, 01-12-2013 17:57:19   I guess if you always carried a shackle would work. [Reply]  [No Email]
Puddles 01-13-2013 02:35:25 24.113.77.208 Report to Moderator	Re: Wrapped up the Silverado Bumper Build (Pics + Videos) in reply to Stick welding, 01-12-2013 18:14:22   I wish I had a nickel for every shackle pin I've spun! :lol: [Reply]  [No Email]