Allied #45426 3 ton hydraulic service jack, Parts?

S.Crum · Dec 26, 2012

Hi folks, I have a 20 year old Allied hydraulic floor jack I bought new at Sam's club 20 or so years ago. A couple months ago it started leaking around the plunger and doesn't work now (leaks out the oil). I found the company's website and e-mailed their parts dept with the model and S/N to see if I could get a seal kit or the seals I need to fix this, got an e-mail back from them that they no longer service these parts.
Anybody have an idea of who might put together a service kit for this jack? Worst case I can take it all apart and take the old seals to town and have Staver Hydraulics Co. Match up all the seals. I did buy a new jack, but I want to fix this one too.
Thanks

IaGary · Dec 27, 2012

Your best bet would be to measure up the seals and get from your local supplier.

I don"t buy kits for any cylinder. I measure them up and Buam Iron can match them all up for about half the price.

Gary

greygoat · Dec 27, 2012

If it"s a China Made Jack????????????? I spent a
considerable amount of time trying to track
parts for one of those Cheap, (Dangerous) china
made floor jacks that all of the discount places sell. I finally tracked down a distributor in
LosAngeles who imported hundreds of thousands of
them, by the ocean container full..he said; "Look
buddy, i"m in the business of selling jacks..NOT PARTS !")
AND...remember, when you"re looking for parts..
it"s likely to be METRIC !

Allied #45426 3 ton hydraulic service jack, Parts?

S.Crum

Well-known Member

IaGary

Well-known Member

greygoat

Well-known Member

Similar threads