demolition bar

rls_ia

Member
I"m looking for one of these bars, if the picture doesn"t make it it is like a wrecking bar with a u shaped end where it saddles over the joist for removing flooring boards. Removing haymow to make a shop out of a barn.Only place I"ve found them is overseas in the UK.
Thanks, Bob
a81079.jpg
 
Looks real similar to a Mayhew 41104 CatsPaw Deck Wrecker, kinda spendy, though. A Duckbill deck wrecker costs less and I believe it will do what you want.
 
I've got a homemade one that works great. Very easy to make. Just take a bar, pipe, or tubing and weld a fork out of heavy rods on to it and weld a short pipe on bottom for leverage. Very similar to your pic.
 
Yeah, after seeing the prices, I'll make my own, I have extra pry bars I can use to make one.
Thanks
 
We made our own about 50 years ago. It's probably still on the farm that my brother owns now.
 
I made one 30 some years ago. Used 1" pipe for the handle - 1" wide by 1/2" thick stock for the fork. I also used the flat stock for the fulcrum, but I like the other poster's idea of round stock or pipe for the fulcrum.

They work good for what you're wanting to do.
 
I see it as four pieces. The handle, a short piece of pipe for the fulcrum, and the two forks. Forget the little fancy double back part.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top