Stumped on engine.

I am stumped on a Sattley engine. I cannot get any magneto I put on it to fire when cranking. For some reason I can't get it to trip fast enough. I just put new coils, had it charged,set the point opening distance on a magneto and had it running but now I cant get it to spark without just cranking it as fast as I can turn the darn thing. I put that magneto in an IH 1 ½ M and it started right up. I took the mag off the M and put it on the Sattley and have the same problem. No fire at normal cranking speed. Any suggestions would be appreciated. See picture of setup.
a59712.jpg
 
Thanks for your suggestion. I got it right by removing one of the brass washers I has made and installing a flat washer like the Wico EK manual shows.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top