Hi guys. I have been working on getting a generator motor running for a buddy of mine. I can get the motor to run by squirting fuel in the intake.
The electric solenoid is working to let fuel in; however, I cannot get the fuel through the carb. Not really familiar with this carb. It is off of a2 cylinder horizontal shaft GX610 engine. I'm going to try to post a couple of pics to have you guys look at, to see if you can help. When I blow air through the inlet, I get nothing. When I blow air through the brass fitting onn the left of the pic, I get fuel out of the solenoid shut off hole.
I took the 4 screws out of the bottom, but it wouldn't come appart. I din't want to force anything.
Thanks
Alan
The electric solenoid is working to let fuel in; however, I cannot get the fuel through the carb. Not really familiar with this carb. It is off of a2 cylinder horizontal shaft GX610 engine. I'm going to try to post a couple of pics to have you guys look at, to see if you can help. When I blow air through the inlet, I get nothing. When I blow air through the brass fitting onn the left of the pic, I get fuel out of the solenoid shut off hole.
I took the 4 screws out of the bottom, but it wouldn't come appart. I din't want to force anything.
Thanks
Alan