rockford clutch

Wilson

Well-known Member
This is the clutch thats too big need smaller one for wisc TJD
a29518.jpg

a29518.jpg

a29519.jpg
 
I hope that your TJD came from the factory
equiped for a clutch, if not, the drive shaft is
too long, and the casting is not drilled and
tapped for a clutch to bolt on. It's an awful
job to put a clutch on a Wis. 2 cyl, that didn't
come equiped for one.
I,m looking for one with a bellhousing, and
automotive type clutch, some forklifts had them.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top