Spin out rims

660 guy · Oct 31, 2022

Hello, i've got a pair of IH spin-out rims for my 460 Farmall does anyone have any suggestions on get'm painted they being two different
colors hubs red, rims silver? It don't look to me like you can separate them. Thank you for any ideas on this! Mark

stevieb49829 · Oct 31, 2022

Got a picture? My Allis rim sliders are bolted to the centers, with two big carriage bolts on each slider. I just unbolted the cast sliders at the rim center, and pounded the center away from the sliders. Your's may be different.

stevieb49829 · Oct 31, 2022

If yours are the cast centers, it looks like you just back off the threaded adjusters until you can get them clear of the rim ramps.

showcrop · Nov 1, 2022

All power adjust rims that I have seen will just thread all the way off the center once you back the clamps off and remove the stop.

E Lilley · Nov 9, 2022

You can separate them but IH had the most aggravating spin outs on the market. Takes forever to loosen and adjust them.

Spin out rims

660 guy

Member

stevieb49829

Well-known Member

stevieb49829

Well-known Member

showcrop

Well-known Member

E Lilley

Member

Similar threads