need help in identifying thid loader

marlin54

Member
Bought this loader and brackets hoping to find out if anyone knows the make. It is written on side of loader in paint that it came off a 66 series International and will also fit a 20 series John Deere? I have plenty of pis of it and the brackets if someone can help. Also I see 2 colors of paint . Red and of course green so must have been on both theses tractors. thanks to may help me .
<image src="http://forums.yesterdaystractors.com/photos/mvphoto13932.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto13933.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto13934.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto13935.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto13936.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto13937.jpg"/>

<image src="http://forums.yesterdaystractors.com/photos/mvphoto13938.jpg"/>
 
I have not seen a loader with that type of rear mount. I really wonder if the entire loader mount is home made. The loader looks like an older Kelly with the long factory mounts cut off. The only thing I am sure of is it has a Shur-Loc quick tach on the front. This allows you to just put the pins in your bucket/bale spear and hook up/unhook quickly.
 
As I said it is a Case model 90 loader built by Great Bend, with modified rear lower axle struts.
Loren
a263935.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top