2wheelgnnr
Member
Any ideas would be appreciated. I have acquired a Jubilee and id like to repair this dent damage im about to explain. The bottom dog
leg on one side of the hood has the curve portion that goes from the radiator to the side that is crushed in a bit...creased. I a pic
would probably be better but hope explaining right. How would I attempt to start pushing this out? I dont want to just fill with
filler...want to try and hammer and dolly a good portion of it out. start with a curved pc on backside and slowly work out from
there?? Im thinking of adding some heating to soften up metal vs pounding the crap out of it.... NOt sure how to "start working this
without stretching metal or what not......
leg on one side of the hood has the curve portion that goes from the radiator to the side that is crushed in a bit...creased. I a pic
would probably be better but hope explaining right. How would I attempt to start pushing this out? I dont want to just fill with
filler...want to try and hammer and dolly a good portion of it out. start with a curved pc on backside and slowly work out from
there?? Im thinking of adding some heating to soften up metal vs pounding the crap out of it.... NOt sure how to "start working this
without stretching metal or what not......