Adding diverter valve to Ferguson TO-30?

Buggutz

New User
Hi,
New to the group here. Was wondering if anyone had any information or references to installing a hydraulic diverter valve on a Ferguson TO-30. My current set up requires me to lock up my lift arms in order to use the front loader. Was wanting to put in a diverter valve so I can easily select between the two.

Thanks
 
Might get a quicker response if you post this on the "Harry Ferguson" Forum just down a little further under the manufacturers forums. And I will be interested in the answers as my MF-35 still has the 3-point arms locked up for the loader. Originally had a trip-loader and had to raise the loader with the 3-point control.
 
Mark, is this what you are asking about? Bolts on in place of the cover where the stand pipe comes up.

Should work with the 35 series, and other models. Don't think it will work with TO30 and older though.
Diverter Valve
 
There is NO WAY to do that. For remote use they DO ave to be locked down and 2" down is enough. There are or were straps made that bolted around the axle to hold them in place and with that you did not have to wait till the lift arms raised up to where ever the length of your chain was to get remote working. The only way to easily alternate between front loader and 3 point is put on a front mount pump for loader. I had a T)-30 and had homemade straps for that and remote lift was instantanious.
 
Leroy, please reread the post.

I was answering deere mark's question about his MF35.

You are correct, the block will not work on a TO30.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top