(quoted from post at 14:38:55 01/29/17) Thanks, guys. I got the corrosion off and was able to remove the nut. Now, that nut is but a thin shell of its original self! I will replace at least the nut. Would you advise that I replace the entire clamp? If so, how is that done? Or, should I give it a try with a new nut and see if I can get a tight fit?
(quoted from post at 20:20:21 01/29/17) If you don't want it to corrode up again, seal the area around the post and case. Acid leaks up around the post and corrodes the terminal. I seal all my batteries when I buy them and never have this problem. Be sure to clean and dry the battery before sealing.
(quoted from post at 22:20:21 01/29/17) If you don't want it to corrode up again, seal the area around the post and case. Acid leaks up around the post and corrodes the terminal. I seal all my batteries when I buy them and never have this problem. Be sure to clean and dry the battery before sealing.
(quoted from post at 07:16:25 01/30/17)(quoted from post at 22:20:21 01/29/17) If you don't want it to corrode up again, seal the area around the post and case. Acid leaks up around the post and corrodes the terminal. I seal all my batteries when I buy them and never have this problem. Be sure to clean and dry the battery before sealing.
How do I seal the battery? Is that what happens when you use the battery terminal protection spray?
(quoted from post at 08:41:27 01/30/17) If you seal battery terminals with battery terminal protector they will look like this and they don't collect dust and dirt like grease.
Here's a photo of what it looks like and if this was mine I would have gave it one more coat.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy