Fallhunt42
New User
Hi a little back ground. First time tractor owner. Bought a 1967 ford 2000 3 cyl gas tractor with a fasco fel. Tractor had a blown engine but was told everything else worked.
Replaced engine. Changed all the fluids.
Have 2 hours on new proof meter. Fel loader was operating but extremely slow, 3 point hitch not moving at all. New fluid looked like chocolate milk so drained and did a diesel flush where I cycled fel ( moved a whole lot faster) and tried 3 pt hitch but that didn't move.
I looked for a selector switch and there is not on this tractor. Remote hydraulics are controlled by double spool valve.
I am open to suggestions at this time as to what to do next.
Thanks for your help
Replaced engine. Changed all the fluids.
Have 2 hours on new proof meter. Fel loader was operating but extremely slow, 3 point hitch not moving at all. New fluid looked like chocolate milk so drained and did a diesel flush where I cycled fel ( moved a whole lot faster) and tried 3 pt hitch but that didn't move.
I looked for a selector switch and there is not on this tractor. Remote hydraulics are controlled by double spool valve.
I am open to suggestions at this time as to what to do next.
Thanks for your help