(800) 853-2651
SHOP NOW

MB Power Grader

B

bboaz

New User
I am new to this forum. I normally spend my time at the caterpillar site since I have crawler tractors but I have something someone might be interested in. I have reproduced the MB Power Grader logo for a friend who has restored his grader. I still have the dies and can make new emblems out of light gauge sheet metal. I understand the restrictions in reproducing trademark logos and as long as I do not sell the logos it can be done for restoration purposes. If you need new MB Power Grader logos for your project let me know. I put quite a bit of time in making the dies and hate to see the work go to waste.
35304.jpg
This is the new logo.
 
I cut the letters out of a piece of 16 gauge steel with a plasma torch and attached them to a piece of 1/2 inch plate. Then used a piece of conveyer belting attached to another piece of 1/2 plate as the top section of the die. Used a piece of old dryer cabinet steel between the top and bottom die and pressed them together on my iron worker.
Here is a picture of a Cat 60 emblem with the dies. The rubber on the top die presses the metal down around the letters forming the raised letters. This emblem also has an outside border which was milled into the base plate
a224717.jpg
 
You must log in or register to reply here.

Similar threads

B
Mf 30b power steering pump
Replies
0
Views
174
Bfinney5238
B
P
350 u power steering reassembled but not working
Replies
12
Views
483
Paul 300 U
P
G
1950 8n Timing problem
2
Replies
25
Views
2K
JMOR
J
C
Chrr Lynn Power steeting repair
Replies
0
Views
288
cleddy
C
B
2N basket case/ Just shoot me.
Replies
15
Views
1K
Bruce(OR)
B
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top