lastcowboy32
Well-known Member
I've gathered a pile of scrap metal from our dairy barn renovation. I want to make a gantry crane style engine hoist out of it.
Some of the metal is raw, but some of it is galvanized.
Any tips on how I can make it safer to torch and/or weld with galvanized pipe?
For instance, if I take a grinder and grind off the zinc before torching/welding; will that minimize the fumes?
Some of the metal is raw, but some of it is galvanized.
Any tips on how I can make it safer to torch and/or weld with galvanized pipe?
For instance, if I take a grinder and grind off the zinc before torching/welding; will that minimize the fumes?