57fergieman
Member
I have just recently finished a rebuild of
the engine on my 1957 Ferguson to35.and
after honing the cylinder walls replacing
the rings turning the crank and a full head
job also replace the governor and rebuild
the carb.she runs nicely but I did a
compression test and I am just wondering if
these numbers are acceptable cylinder 1 70
psi cylinder to 100 psi cylinder 3 90 psi
and cylinder four 90 psi. the engine is a
continental z 134
the engine on my 1957 Ferguson to35.and
after honing the cylinder walls replacing
the rings turning the crank and a full head
job also replace the governor and rebuild
the carb.she runs nicely but I did a
compression test and I am just wondering if
these numbers are acceptable cylinder 1 70
psi cylinder to 100 psi cylinder 3 90 psi
and cylinder four 90 psi. the engine is a
continental z 134