Air in the fuel lines

Hello everyone I have a question and hope someone can help i have a ford 7000 tractor and i replaced the fuel filter and now i cannot get fuel to anything ive tryed bleeding and still nothing
 
There is a primer on the charge pump to push fuel up. If that doesnt work loosen up all 4 injectors
and have someone crank it until fuel starts coming out then tighten the injector back up. That what
I did to ours when I changed the primer pump on it.
 

Do you have the bleeder on top of the pump open? It is possible too that the cam in the pump is in the wrong position for the primer to work too. Just bump the starter to move it.
 
(quoted from post at 09:24:28 04/10/15)
Do you have the bleeder on top of the pump open? It is possible too that the cam in the pump is in the wrong position for the primer to work too. Just bump the starter to move it.[/quo

Yes i have the bleeder open and tryed priming it but i still get nothing i can feel the primer get harder
 

What is the history? was it running well and you just changed the filter for PM? Or was it having problems?
 
(quoted from post at 18:04:32 04/10/15)
What is the history? was it running well and you just changed the filter for PM? Or was it having problems?
It was running just wanted to change filter i just bought the tractor and didnt know when the last time it had been changed
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top