Cracked exhaust on my 350U LP

AlanA · Jun 17, 2014

Welding or brazing on the exhaust? Or do I depend on the choice of the shop I pick to do the work?

[/img][/url]

Steve@Advance · Jun 17, 2014

http://www.yesterdaystractors.com/cgi-
bin/viewit.cgi?bd=toolt&th=368266

This is over in Tooltalk. Good info.

george md · Jun 17, 2014

Alan,

oxy/acet would be the best method , any form

of arc would be the worst choice. Brazing may

work ,if you can get it clean enough and it is

not burned too badly.

Looks like a crack in #1 port as well as the

break in the center. Read the discussion on

the tool board.

george

george md · Jun 17, 2014

Steve ,

You answered while I was typing.

george

AlanA · Jun 18, 2014

(quoted from post at 04:05:16 06/18/14)
Alan,

oxy/acet would be the best method , any form

of arc would be the worst choice. Brazing may

work ,if you can get it clean enough and it is

not burned too badly.

Looks like a crack in #1 port as well as the

break in the center. Read the discussion on

the tool board.

george

Thanks for the info. The task is WAY beyond my meagre skills. I just needed to be able to talk semi-intelligently with whomever I hire to do the job. One does not practice on pieces made of solid unobtanium.

Alan

Cracked exhaust on my 350U LP

AlanA

Member

Steve@Advance

Well-known Member

george md

Well-known Member

george md

Well-known Member

AlanA

Member

Similar threads