1938 Farmall F-20 Engine

Hello, I am restoring a Farmall F-20. I just recently removed the
pistons. I've been searching, trying to find the o-rings, but with
no luck. If someone could describe to me where the o-rings are
in a very precise manner, I would greatly appreciate it. Also, do
you guys think I need to do anything else to the engine? Any
help you could give me would be greatly appreciated. Thanks in
advance.
 
Assuming this engine has replaceable cylinder liners, and most do, the oring will be at the bottom of the liner where it seats into the block.
 
Ok im going to assume you are referring to liner o rings. This could be fun for you but might not be bad. Youll have to drive the liners out of it. The cylinder bore is removable and that part is the liner. You look up from the bottom you will see where the liner sticks out the bottom of the block. Take a piece of industrial wear material if you can get it or a brass punch if you cant and drive the liners out of it. You will see the o rings.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top