B414 Hydraulics

roaddevil49 · May 25, 2014

No oil coming through suction filter from reservoir to pump, have everything ready to pull filter from housing but it's not moving, what's the secret for removal?
When hydraulics were working the rockshaft would come up on it's own, no matter were levers were set,put a load on it, worked like it was suppost to, any ideas?

andyd4ntx · May 26, 2014

When I pulled the suction strainer out of my IH444 I used Acetone+ATF squirted it on and let it soak in for a full day, then I used a medium rubber hammer to lightly tap the pipe up and down it must have taken 20 minutes of "light" tapping but it worked free.
Soak it up and work it slowly.
Andrew

B414 Hydraulics

roaddevil49

Member

andyd4ntx

Member

Similar threads