Stuck 3rd piston!

FarmallChase

New User
Hey guys i am new here and I'm 16 years old. For my SAE project in FFA i am restoring my grand-fathers Farmall H. I have got the motor to the point where i can take it out but before i do so i want to get the 3rd piston from the front end of tractor unstuck. The other pistons either came out right away or came out with sleeves. I am looking for a way to get that last piston out. I have tried the diesel in cylinder hole and used a block of wood to try and pound it out but no luck. The other question i have is when we tried to pop the clutch on it we pulled it with my truck under 15mph and on our way in the driveway the front end(wide front end) the front end started to shake any ideas on either one of my problems? Thanks guys!
 
I would pull the engine out, turn it upside down, remove the crankshaft and bump the sleeve/piston and all out. That is quick and easy. My wet sleeve removing tools in the picture.

Picture2045-vi.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top