I have a new Prince 3060 2 stage wood splitter valve I hooked up to my B/W pump #S15S6AH22R and cant get the rapid extend to work.
I looked all over the net for the above info but could not figure out if this is a 2 stage pump. The prince valve I have will not work with a 2 stage pump. Can anyone tell me what a 2 stage pump looks like physically?
B/W pump nomenclature:
S= gear pump
15= series
S= united states
6= Gallons/minute
A= side port configuration
H= 2 bolt mounting pad
2= straight keyed short shaft configuration
2= design # (?)
R= clockwise rotation
Hope this helps anyone looking for nomenclature of the Borg Warner hydraulic pump.
I looked all over the net for the above info but could not figure out if this is a 2 stage pump. The prince valve I have will not work with a 2 stage pump. Can anyone tell me what a 2 stage pump looks like physically?
B/W pump nomenclature:
S= gear pump
15= series
S= united states
6= Gallons/minute
A= side port configuration
H= 2 bolt mounting pad
2= straight keyed short shaft configuration
2= design # (?)
R= clockwise rotation
Hope this helps anyone looking for nomenclature of the Borg Warner hydraulic pump.