(800) 853-2651
SHOP NOW

Jacobsen UV4

J

Jason Flohr

New User
I have a Jacobson UV4. My Grandpa Bud was an electrical engineer for Jacobson. I still have the 1984 "60th annual company picnic" key chain that he kept the key on. My sons are the 5th generation to drive this beloved beast. It is a family heirloom. It recently burned up a wheel baring does anybody know wear to get a replacement or what I would have to do to retrofit something?
 

most people take whatever bearing to the bearing shop. They measure it up and give you anew one.
 
It's most likely a common bearing and a bearing house can match it up but why not see if the Jake commercial dealer has a parts book? UV-4's are a good machine, especially the newer models. My dad sold them new and we had a 1976 he took in trade. I think that was the first year for them but they improved them a couple years later. Before Jacobsen bought Bruce Manufacturing, he had a fibreglass bodied demo PUG that evolved into the UV-4.
 
There is almost nothing left of the old wheel bearing and I don"t want to have to pull the other side if I can avoid it. I contacted Jacobsen and they helped me to find the ID tag. They thought it was made by Peerless-Tecumseh. Turns out mine was made by HAXCO. Still hunting down parts but I have some leads that look promising. Thanks for everybody"s help.
 
You must log in or register to reply here.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top