Cordova Steve
Member
I had this EWC wagon gear I'm restoreing powder coated in green (not painted). Now as I look at it from the rear it has some dimples in the pitted frame area's. I don't know jack about body work. A bar room autobody guy told me I could DA sand it down a bit, then use some bondo to smooth it out, then re-shoot with the same color spray paint. I'd just do this in a few areas where I may put brand name decals.
What's your thoughts and give me details on what grit sand paper etc. step by step if it's a good idea!
What's your thoughts and give me details on what grit sand paper etc. step by step if it's a good idea!