allis chalmers C

Anonymous-0

Well-known Member
I need more help! looking for liner o"rings. I got some from parts house. Way to big. I belive they are for AC liners. I must have after market liners. any way to identify.any place to get some.
 
Agco sells them for around $8 per set. I still have a few out in my tool box that I got a few years ago when I was doing and engine. Best place to get them is the A/C dealer which is now agco
 
I got some from OK tractor. I belive they are for Allis Chalmers liners.I must have after market liners. put o'rings on and liner would not fit thru top hole in block.Anyone know how to identify after market liners.And where to get new o'rings
 
The correct o-rings are not very big around maybe a 1/16 of and inch in diameter or so. You do need to use dish soap on them so that the sleeve and o-ring will seat as it should and the top and bottom hole in the block needs to be extra clean so things fit as they should. Done a good many of those old C engines in the years I have played with them
 
seems agco and ok tractors have o'rings for oem allis chalmers liners no listings for after market liner o'rings.I also have put together many engines.so i know they are the wrong o'rings. if I can't find any that fit I'll have buy new liner kits. I am trying to avoid that. Did anyone run into this problem? What did you do
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top