Author	[Modern View]
Pat Hc 12-09-2012 13:30:30 72.224.32.232 Report to Moderator	I need more help! looking for liner o"rings. I got some from parts house. Way to big. I belive they are for AC liners. I must have after market liners. any way to identify.any place to get some. [Reply]   [No Email]
Pat Hc 12-09-2012 15:00:47 72.224.32.232 Report to Moderator	Re: allis chalmers C in reply to Pat Hc, 12-09-2012 13:30:30   I got some from OK tractor. I belive they are for Allis Chalmers liners.I must have after market liners. put o'rings on and liner would not fit thru top hole in block.Anyone know how to identify after market liners.And where to get new o'rings [Reply]  [No Email]
old 12-09-2012 15:17:52 209.86.226.40 Report to Moderator	Re: allis chalmers C in reply to Pat Hc, 12-09-2012 15:00:47   The correct o-rings are not very big around maybe a 1/16 of and inch in diameter or so. You do need to use dish soap on them so that the sleeve and o-ring will seat as it should and the top and bottom hole in the block needs to be extra clean so things fit as they should. Done a good many of those old C engines in the years I have played with them [Reply]  [No Email]
old 12-09-2012 13:46:39 209.86.226.19 Report to Moderator	Re: allis chalmers C in reply to Pat Hc, 12-09-2012 13:30:30   Agco sells them for around $8 per set. I still have a few out in my tool box that I got a few years ago when I was doing and engine. Best place to get them is the A/C dealer which is now agco [Reply]  [No Email]
Pat Hc 12-09-2012 18:50:51 72.224.32.232 Report to Moderator	Re: allis chalmers C in reply to old, 12-09-2012 13:46:39   seems agco and ok tractors have o'rings for oem allis chalmers liners no listings for after market liner o'rings.I also have put together many engines.so i know they are the wrong o'rings. if I can't find any that fit I'll have buy new liner kits. I am trying to avoid that. Did anyone run into this problem? What did you do [Reply]  [No Email]