730 power steering

Anonymous-0

Well-known Member
I had to remove power steering valve and worm gear drive at top of pedestal. When i replaced it twice now , it turns to the right by it self and will not turn to the left unless i shut tractor off . any ideas
 
Probably need to loosen the 4 screws that hold the steering valve on and tap it one way or the other to center it.
 
Maark is right, and to go a bit farther, take a magic marker or something similar and mark the position between the valve and the casting it bolts to so you can tell how far you moved it. It takes just a little tap on the valve with a hammer to make a big difference. Sorry I don't remember which way to tap it to center left or right but you'll find out when you start moving it. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top