John deere 720

whippin

New User
We bump start it , one day in process of starting it picked up a vibration. Clutch assembly for torn apart yet, then put back together everything seemed okay. Check flywheel on the other side, we have a taper lock flywheel on on. Everything seems well there everything seems to be tight like it should be. what what am I missing that would be causing the vibration? 72460 15945
 
If you remove the clutch drive disk assembly be sure to get it installed back in time on the crank (may have V marks) otherwise that in itself can cause a good vibration. Its heavy weighted side must be 180 opposite from the flywheels heavy weighted side or its vibration city.

John T
 
(quoted from post at 16:54:09 07/22/12) If you remove the clutch drive disk assembly be sure to get it installed back in time on the crank (may have V marks) otherwise that in itself can cause a good vibration. Its heavy weighted side must be 180 opposite from the flywheels heavy weighted side or its vibration city.

John T


Thank you very much I did remove it but didn't look for a mark.
 
If you cant find any v marks, look (maybe need mirror) at the flywheels inside and find its heavy counterweight and set the clutch drive disk weight 180 opposite from that. If those weighta arent 180 opposite she shakes badly.

John T
 
John, I don't believe you will see a V-mark on that tractor. I believe it is internally balanced with no counterweight on the clutch driver, so no need for it to be timed. Mike
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top