JD 1020 3 cyl gas, removing head

Tim Daly

New User
Have all the bolts out except for the two that are between the valves, under the valve cover. Is there some special wrench that is made to fit in there? The bolts are almost directly under the horizontal arm that the valves ride on.
 
Thanks. Figured out this morning that the fellow who told me differently was not correct. Shall probably take it all apart, get the head machined, then get someone good to put it back together and set the valves properly.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top