Author	[Modern View]
actionpack 04-14-2012 19:39:15 174.124.245.236 Report to Moderator	distibuter gear broke , cam gear has broken peices , need to find a used cam , any body know of 1 , thanks in advance , need a repair manual , [Reply]   [No Email]
Old Popper 04-16-2012 17:04:52 216.51.202.134 Report to Moderator	Re: case vac cam in reply to actionpack, 04-14-2012 19:39:15   I bought a manual a year ago from Steiners that is called "the dealers service manual" for Case "VA" series tractors and engines. I just checked, it cost me $31.25. Hope this helps. [Reply]  [No Email]
actionpack 04-15-2012 18:29:05 174.124.245.236 Report to Moderator	Re: case vac cam in reply to actionpack, 04-14-2012 19:39:15   another question if i may , on the manuals , i'm looking for a repair manual that has all the info on tearing this engine down and rebuilding it ,and also covers the rest of the tractors peices , is this the same manual there calling the service manual , use to do alot of wheching and we always called it a repair manual , have'nt been into the inside of a engine for years , but this old case is old school , and it will be fun to turn it back into what it use to be in its day , [Reply]  [No Email]
old 04-15-2012 19:26:52 209.86.226.34 Report to Moderator	Re: case vac cam in reply to actionpack, 04-15-2012 18:29:05   No one manual will cover it all. I-T manuals are a good start and can be found at most farm and home stores [Reply]  [No Email]
actionpack 04-16-2012 15:57:51 174.124.233.58 Report to Moderator	Re: case vac cam in reply to old, 04-15-2012 19:26:52   i took a look in 2 reactor supply stores today , thats about the closes tractor supply store we have here , i was going to buy 1 from the manual section here , but i needed to no what 1 will have the info i need for a rebuild , [Reply]  [No Email]
old 04-16-2012 19:26:22 209.86.226.40 Report to Moderator	Re: case vac cam in reply to actionpack, 04-16-2012 15:57:51   The I-T C-201 is a good starting point for a manual [Reply]  [No Email]
actionpack 04-21-2012 01:57:25 174.124.233.58 Report to Moderator	Re: case vac cam in reply to old, 04-16-2012 19:26:22   thanks old , [Reply]  [No Email]
El Toro 04-15-2012 11:03:33 108.3.225.57 Report to Moderator	Re: case vac cam in reply to actionpack, 04-14-2012 19:39:15   Put a wanted ad in "Classified Ads" under Marketplace in the upper left on your monitor's screen. You should be able to find one from there. Place your request over on the Case forum. Hal [Reply]  [No Email]
actionpack 04-15-2012 17:51:26 174.124.245.236 Report to Moderator	Re: case vac cam in reply to El Toro, 04-15-2012 11:03:33   thanks , would'nt know off hand what would cause the first gear to break would ya , [Reply]  [No Email]
old 04-15-2012 17:57:43 209.86.226.61 Report to Moderator	Re: case vac cam in reply to actionpack, 04-15-2012 17:51:26   I have a VAC parts tractor and I think I have a couple cams on hand. E-mail is open [Reply]  [No Email]
actionpack 04-15-2012 18:08:43 174.124.245.236 Report to Moderator	Re: case vac cam in reply to old, 04-15-2012 17:57:43   sounds good , let me check a local junk yard tomarrow that mite have a vac they took in for salvage , if that don't work i will be emailing you about the cam , the junk yard mite part with the whole tractor cheap if i'm lucky , thanks , and i'll let you know [Reply]  [No Email]
actionpack 04-16-2012 15:53:52 174.124.233.58 Report to Moderator	Re: case vac cam in reply to actionpack, 04-15-2012 18:08:43   i sent a email old , [Reply]  [No Email]
actionpack 04-18-2012 13:28:53 174.124.233.58 Report to Moderator	Re: case vac cam in reply to actionpack, 04-16-2012 15:53:52   the tractors i looked at had the hydro pump in the front of the engine , but they did'nt run off the fan belt , they were installed on the front timming cover , is this what you have , or is it like you said , they run from a belt [Reply]  [No Email]