hello
i have recently purchased a tea20 serial no tea 62549
the cylinder head had five copper gaskets on it(why) and was cracked around the core plug this was beyond repair, so i traced a second hand cylinder head that i belive to be corect (3.373 inches in depth )
on re-assembly i found that the rocker was not giving any clearance on the tappets(keep with me) so is the head the wrong one or the con rods to long(how long should they be)or the rocker assemby incorrect,where do i start.It seems that if i was to put all the gaskets back it would all fit, but we know this can't be right.
Any help greatfully recieved'
paul
i have recently purchased a tea20 serial no tea 62549
the cylinder head had five copper gaskets on it(why) and was cracked around the core plug this was beyond repair, so i traced a second hand cylinder head that i belive to be corect (3.373 inches in depth )
on re-assembly i found that the rocker was not giving any clearance on the tappets(keep with me) so is the head the wrong one or the con rods to long(how long should they be)or the rocker assemby incorrect,where do i start.It seems that if i was to put all the gaskets back it would all fit, but we know this can't be right.
Any help greatfully recieved'
paul