Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Pulling Discussion Forum

1949 G Puller

Welcome Guest, Log in or Register
Author 
Jody

12-31-2006 14:40:26




Report to Moderator

Hello All,

We are looking for a pair of M&W or Hinrichs 6.375" pistons/rings for our '49 G build-up. Does anyone have a Powerblock available for our G too? All insights and opinions welcomed. Please guide us! Thanks




[Log in to Reply]   [No Email]
Pull a 4010

12-31-2006 16:29:18




Report to Moderator
 Re: 1949 G Puller in reply to Jody, 12-31-2006 14:40:26  
May want to consider sleeving a stock block over size. I hear of pullers going that route instead of a powerblock, and from what I hear in the long run cheaper.



[Log in to Reply]  [No Email]
4010 conversion

12-31-2006 16:46:04




Report to Moderator
 Re: 1949 G Puller in reply to Pull a 4010, 12-31-2006 16:29:18  
We converted a 4010 lp to gas but, it is having a very sluggish thottle response. We advanced the timing by 4 degrees, still did not help. any suggestions?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy