Last Saturday Sept 17th was the big MSTPA and BPM Truck and Tractor Pull at Holden,MO..Our MSTPA announcer Kaden Thieman lives in Holden....About 4 weeks ago at the Missouri State Fair pull I asked Kaiden if he wanted to drive my tractor at Holden...He said that he would think about..The fans spoke and said that they wanted to see Kaden pull..Kaden has never once pulled a tractor or truck in his entire life.He first hook would be on my 700 horsepower 10,500 Hot Stock 12.5 MPH IH 1466 puller..Kaden had once drove stock cars and had a helmet from those days...He said the butterflies were bad every time that he hooked...Read all about it on his FB page where the video is.
The BPM classes started at 2 PM so we entered Kaden in their 10500 Hot Stock class at 12.5 MPH..Heres Scott Potter giving driving instructions...Since my wifes bad wreck on August 27th Scott has been driving quite a bit for me.
Heres John Hollomon putting a Go-Pro camera onboard for Kadens very first hook....John runs the Missouri Truck And Tractor Pulling Fan Page on Facebook..John is a UPS driver and videos tractor pulls all over the state...Hes a great guy.
Heres Kadens first hook on the south track in the BPM 10500 Hot Stock..He had a shaky start but finally got rolling..He never did totally open it up but still finished 3rd at 336 ft ...Theres a link to a video of it on his Facebook page ...Go to the 2nd post on his page...The top post is for our local pull at Nevada,MO this Saturday night
Kaden was number one hook on the north track to start off the MSTPA pull at 7 PM..We told him to open it up and he hit 15.6 mph blowing the horn...We told him to turn it down and drop to 6th hook...THe picture is his 2nd hook..He came back and had a good hook going but shut it down at 305 ft finishing 7th out of 9..He thought that he was going out of bounds but after 300 ft there is no out of bounds...If he had stayed in it he might have been 3rd or 4th at around 310-312 ft..A 4020 JD pulled 321 ft to win the class.
Kaden got better with every hook and came off the line great on his 3rd and final hook...He was lucky to get that last hook as while I was driving it to the trailer it started jumping timing and shooting fire....Its just got a 3 bolt hub and thats barely adequate for a P pump capable of 800 CC's of fuel...Scott Potter is working on it today at his shop in Lamar,MO..
Heres Emma Potter pulling her Rocket Science 4430 JD in the BPM 10500 Hot Stock class..
Click the link below to see Kadens first hook.
Video
The BPM classes started at 2 PM so we entered Kaden in their 10500 Hot Stock class at 12.5 MPH..Heres Scott Potter giving driving instructions...Since my wifes bad wreck on August 27th Scott has been driving quite a bit for me.
Heres John Hollomon putting a Go-Pro camera onboard for Kadens very first hook....John runs the Missouri Truck And Tractor Pulling Fan Page on Facebook..John is a UPS driver and videos tractor pulls all over the state...Hes a great guy.
Heres Kadens first hook on the south track in the BPM 10500 Hot Stock..He had a shaky start but finally got rolling..He never did totally open it up but still finished 3rd at 336 ft ...Theres a link to a video of it on his Facebook page ...Go to the 2nd post on his page...The top post is for our local pull at Nevada,MO this Saturday night
Kaden was number one hook on the north track to start off the MSTPA pull at 7 PM..We told him to open it up and he hit 15.6 mph blowing the horn...We told him to turn it down and drop to 6th hook...THe picture is his 2nd hook..He came back and had a good hook going but shut it down at 305 ft finishing 7th out of 9..He thought that he was going out of bounds but after 300 ft there is no out of bounds...If he had stayed in it he might have been 3rd or 4th at around 310-312 ft..A 4020 JD pulled 321 ft to win the class.
Kaden got better with every hook and came off the line great on his 3rd and final hook...He was lucky to get that last hook as while I was driving it to the trailer it started jumping timing and shooting fire....Its just got a 3 bolt hub and thats barely adequate for a P pump capable of 800 CC's of fuel...Scott Potter is working on it today at his shop in Lamar,MO..
Heres Emma Potter pulling her Rocket Science 4430 JD in the BPM 10500 Hot Stock class..
Click the link below to see Kadens first hook.
Video