Water in the oil!

VicS · Nov 26, 2017

Went to Princeton In. Friday to practice. Was going to weigh 435 up to pull in 5000 king of the hill. Pull was on Sat. Pulled once got hot! Wasn't full of water. Cam put 6 or 8 water bottles in. Pulled again, not so hot but wouldn't cool down. Loaded it and came home. Water was below crown sheet. Finally checked oil. It was almost plum full of Milk. Pretty Depressing! Found some water glass plus leak repair. Used it like instructions,got it hot poured in and run it for 20minutes. Then left it in for 10 hours. Got up about 4. Drained stopleak water out. Refilled with antifreeze 50-50. Changed oil 3 times. All I had. Loaded and was back at Princeton by 8. Pull starts at 9. Forgot breakfast. No I never won king of hill. Hooked good on west side but got below cam.I just stopped. Then I had a ton of weights to take off. Luckly I had help. Thanks guys. Was so busy I forgot to eat dinner But I had a great time. And 435 is still full of water. And oil is ok. Leaving For Tunica Wednesday. See you-all down there Vic

johns · Nov 27, 2017

Vic you gonna take the head off and check the water jacket seals? Or you thinking its an oring on the liner/sleeve? Bummer, love
those 2-53s. Hope you get it back running strong in Tunica. Keep us posted....

Water in the oil!

VicS

Well-known Member

johns

Member

Similar threads