(800) 853-2651
SHOP NOW

Steering Shaft

I did similar project past Winter. Was 310TD in Super 88. The 310 I used had the cast in oil cooler. Had to redirect steering shaft outside of frame. Worked well and came out pretty clean. If this is what you have I will look for some pics. If you don't have the cast cooler, I THINK the original shaft setup will work. If you have any other questions I will be glad to help.
 
I thought I had more pics but all I could find was this one. I will take some better pics but won't be for a week or so. Tractor originally had Charlyn PS. I bought a piece of CR 3/4 dia. round, steering universal joint from Steiner (I think), and some flanged 3/4" ID bronze bushings. Then fabricated a couple brackets. Rear mounts to bellhousing, front mounts to cultivator pad. Angle of universal joint is at max but works without binding. Pictures will help a lot. Also, you will have to remove or heavily modify the side panels on right side. I fabricated new ones. BTW, was recommended to me to get ceramic button clutch and HD pressure plate as stock will not hold up.
 
You must log in or register to reply here.

Similar threads

D
Oliver 440 Steering
Replies
3
Views
295
Gambles
Gambles
O
Power steering motor rear seal STILL leaking , ahhhhhhhhhh
Replies
0
Views
219
onetotaltoolman
O
F
8000 loose steering shaft
Replies
1
Views
149
Texasmark
T
M
450 power steering unit
Replies
2
Views
484
Mike Fitz
M
T
oliver 88 pistons sleeves
Replies
5
Views
682
VicS
V
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top