deltaelectric
New User
I am new to tractor pulling and have been going at it with a 55' John Deere 60 but it is more of a show tractor so I bought a 1940 M with a stuck engine to build up just for pulling. Does anyone no a good engine builder in eastern NE or western IA? How about a rough idea on what I need to get 100hp or so? I have a friend that pulls with a G that I'm pretty sure makes about 90hp and he does really well so that's where I'm getting my HP #'s.
I've been searching the forum but the post's about this topic are dated so I thought I'd bring it up again. I would pull in the 6000# and 6500# "classic" class for our local pulls (little red sled). It is 3-1/2mph limited, 10% over stock rpm. No add on fuel pumps, any air cleaner. 18.4x38 tires.
Any advice I can get would be appreciated!
I've been searching the forum but the post's about this topic are dated so I thought I'd bring it up again. I would pull in the 6000# and 6500# "classic" class for our local pulls (little red sled). It is 3-1/2mph limited, 10% over stock rpm. No add on fuel pumps, any air cleaner. 18.4x38 tires.
Any advice I can get would be appreciated!